For setting up earthing systems for down conductors or transformer stations.

Features:

• No thickening of the cross-section at the coupling joint
• Self-locking coupling
• Corrosion resistance
• Easier storage and transport
• Universal use according to local soil conditions
• Constant resistance values
• Easily driven in with a vibration hammer

For driving in the first earth rod.
The driving spikes can be used for earth rods made of steel and StSt as well as tubular earth rods.

Range of Earth Rods for the installation in Lightning Protection Systems and Earthing applications in various conditions, including Couplers and other neccessary accessories for installation.

Earth Rod Clamps are used for interconnecting various sizes of earth rods with stranded cables and flat condutors.
The clamps have a high resistance to corrosion and show high mechanical strength to ensure a lasting connection.

Complete system for the installation of drilled earthing systems up to 99 m by means of core drilling; e.g. in pipeline applications or also for rocky ground.

Light design, for implementing earth-termination systems for down conductors.

With driving spike for earthing mobile objects such as vehicles, power generators, etc.

Marconite^®
By adding MARCONITE instead of sand and aggregate in a standard concrete mixture, a highly conductive concrete is formed. Used as a backfill material around the earth electrodes, it provides a conductive medium increasing the surface area of the electrode and ensuring a highly conductive path between the earth electrode and the surrounding ground. As it is concrete based, it cures and provides a permanent solution.

Bentonite
BENTONITE is a moisture retaining clay consisting of sodium montmorillonite. By mixing BENTONITE with water, the resultant slurry will swell and multiply its original dry volume. When used as a backfill material, within a borehole earth system, it will continue to absorb water from the surrounding soil - thus helping provide a stable earth resistance. This is also applies when the clay is used to surround earth plates and lattice mats. It strongly adheres to the earth electrodes ensuring good electrical conductivity between the electrodes and surrounding ground.

For the installation of earth-termination systems e.g. for antennas or construction site distribution cabinets.

For connecting round conductors, flat strips or cables to earth rods.
For cross and parallel connection.

For connecting round conductors, cables and flat strips to earth rods.

For cross and parallel connection of round conductors, flat strips or cables to earth rods.

For driving in earth rods with a vibration hammer.
For earth rods type S and Z.
Ø20 mm (pin Ø12 mm Part No. 620...) or
Ø25 mm (pin Ø15 mm Part No. 625...)

With the Atlas Copco equipment different adapter types can be used. Please note that when placing your order.

For driving in tubular earth rods with a vibration hammer.

For driving in earth rods with a mallet.

For driving earth rods of 1000 mm or 1500 mm in length into the ground using a vibration hammer.

The hammer rig is delivered with a hammer slide guide.

For vibration hammers of the following brands