Accessories for LSA Technology

Proven insulation displacement method
45° angled blades in the disconnection block ensure a minimum change in cross-section
Enhanced stability of the conductor
Enhanced corrosion resistance
Further accessories available on request

Gas Discharge Tube

High-capacity replacement gas discharge tubes for DPL 10 G3. Three-pole version with common arcing chamber for a constant voltage protection level line-line and line-ground.

Art.-Nr. 907217

GDT 230 G3 FSD

item

Gas Discharge Tube

High-capacity replacement gas discharge tubes for DPL 10 G3. Three-pole version with common arcing chamber for a constant voltage protection level line-line and line-ground.

Art.-Nr. 907208

GDT 230 G3

item

Mounting Frame

Mounting frame for 10 LSA blocks of the 2/10 series
Total width: 104.5 mm

Art.-Nr. 907995

MB2 10 LSA

Insertion Tool

Insertion tool with sensor for LSA technology for connecting the wires and simultaneously cutting them to the required length. With fold-out extraction hook and blade.

Art.-Nr. 907994

AW2 LSA

item

Terminal Block

Series 2 for LSA technology for inseparably connecting 10 pairs each on the cable and routing side. Accomodates DPL 10 G3 arresters. Parallel protective circuit only.

Art.-Nr. 907997

AL2 10DA LSA

Disconnection Block

Series 2 for LSA technology for connecting 10 pairs each on the cable and routing side. Protection is provided between the disconnection contacts as soon as DRL components are plugged in. DPL 10 G3 arresters can also be plugged into the disconnection block.

Art.-Nr. 907996

TL2 10DA LSA

item

Earthing Plug

Series 2 for LSA technology for connecting up to 38 earth drain wires or unused signal cores. With earth wire and M4 ring cable lug.

Art.-Nr. 907993

EL2 38EA LSA

item

Routing Module for Disconnection Blocks with LSA Spring-Loaded Terminal

DIN rail mounted routing module with LSA disconnection block of the 2/10 series as well as spring-loaded terminals for variable wire connection. DPL and DEHNrapid LSA surge arresters can be plugged into the routing module.

Art.-Nr. 907991

TL2 10DA CC

item

Integrated into Part No.	907 216
Visual fault indicator	yes
Fail-safe spring	yes

Integrated into Part No.	907 214
Visual fault indicator	–
Fail-safe spring	–

Test standards	DIN 47608-1, -2
Diameter of solid conductors	0.40-0.80 mm
Conductor diameter with insulation	0.70-1.50 mm

Test standards	DIN 47608-1, -2
Approvals	compliance with DTAG TS 0272/96
Diameter of solid conductors	0.40-0.80 mm
Conductor diameter with insulation	0.70-1.50 mm

Earthing via	earthing conductor with M4 ring cable lug
Diameter of solid conductors	0.40 - 0.80 mm
Conductor diameter with insulation	0.70 - 1.50 mm
Colour	red ●

Carrying capacity of connection components D1 Total lightning impulse current (10/350 µs) (I_imp)	5 kA
For mounting on	35 mm DIN rails acc. to EN 60715
Connection (input / output)	spring or LSA / spring or LSA
Earthing via	DIN rail / flat connector 6.3 mm
Diameter of solid conductors	0.40-0.80 mm
Conductor diameter with insulation	0.70-1.60 mm