BLITZDUCTOR ML4 BPD 24 for process automation systems
New module of the BLITZDUCTOR XT series
In automation technology and process control, different communication technologies are used between the control system and sensors/actuators. DEHN has now developed a new surgeprotection module which is specifically suited for digital signals (DI/DO).
The BXT ML4 BPD 24 combined arrester1 protects 24 V d.c. interfaces with earthed negative pole.
In case of a fault, high short-circuit currents flow through battery-backed 24 V d.c. systems for supplying digital outputs. This may overload the arrester.
Signal short-circuits and system faults – Prevent arrester failure
To prevent overload and failure of the arrester, the potential short-circuit current is limited by PTC resistors in the circuit. Thus, the BXT ML4 BPD 24 is ideally suited for circuits with short-circuit currents as high as 40 A in case of a fault.
Arrester testing during operation
Arresters can be easily tested without disconnecting the signal loop by means of the LifeCheck monitoring system.
|BLITZDUCTOR ML4 BPD 24 combined arrester for 24 V d.c. interfaces|