PAS-Ex-Schiene-lang Art.-Nr. 35678
DEHN protects hazardous areas

Non-sparking equipotential bonding bars

The basis for safe system operation in potentially explosive areas

Equipotential bonding systems form the basis for safe system operation.
To eliminate potential differences and prevent dangerous touch voltages, all electrically conductive parts must be connected to the equipotential bonding.

Lightning currents are particularly dangerous in hazardous areas.
To ensure that employees and facilities remain safe, the operator is obliged to provide protection in this area.

 

Non-sparking - tested with lightning currents

You can use the new PAS EX equipotential bonding bars in Ex zones 1/21 and 2/22. They work in a non-sparking manner and their connections are secured against self-loosening.

 

Good to know:

  • The absence of ignition sparking in case of lightning current was tested in a gas atmosphere in cooperation with an external test laboratory.
  • PAS EX can also be used in applications with hydrogen.

Absolute versatility in every detail

This is what the new equipotential bonding bar for hazardous areas has to offer:

1 - Flexible connection possibilities:
Equipotential bonding bar in stainless steel (V2A) in two versions (long with 11 and short with 7 connections)

2 - Flat conductor connection
Defined cable routing for flat conductor connection with 30 or 40 mm

3 - Round conductor connection
Connection of round conductors up to 10 mm in diameter using an adapter

4 - Cable lug connection
M10 connection hole with thread for easy installation of conductors of up to 95 mm²

5 - Push-in connection
Connection of flexible and rigid conductors without tools (4-16 mm2)

6 - Cover with connection marking
For easy identification of the connections

7 - Universal use
In Ex zones 1/21 and 2/22

8 - Tested solution
Non-sparking up to 100 kA (10/350 µs) of lightning current and 50 Hz short-circuit currents

Advantages for you

Flexible use and diverse connection options in Ex zones 1/21 and 2/22

  • More safety in hazardous areas

    The bars can be used in Ex zones 1/21 and 2/22. All connections are secured against self-loosening by means of spring washers.

    Totally flexible.
    Flexibly configurable with a multitude of connection options.

    Tested solution
    Non-sparking up to 100 kA (10/350 µs) of lightning current and 50 Hz short-circuit current.

    Tested in a gas atmosphere (explosion group IIC/hydrogen).

  • Cable lug connection

    Thread in provided in the connection hole, spring washer secures against self-loosening.

    Advantage:
    Quicker and easier connection WITHOUT additional nut.

  • Push-in connection

    Connection of flexible and rigid conductors up to 16 mm².

    Advantage: Installed quickly and easily without tools.

  • Flat and round conductor connection

    Connection of flat conductors (30 or 40 mm) and round conductors (up to Ø 10 mm) possible with adapter.

    Advantage:
    Adapters ensure a defined, non-sparking contact between conductor and equipotential bonding bar by preventing conductors and terminal screws from touching.

Installation examples

This is how you master all the challenges you face during installation.

  • PAS-Ex-Schiene-kurz Art.-Nr. 35530
  • PAS-Ex-Schiene-kurz Art.-Nr. 35533
  • PAS-Ex-Schiene-kurz Art.-Nr. 35489
  • PAS-Ex-Schiene-kurz Art.-Nr. 35486
  • PAS-Ex-Schiene-kurz Art.-Nr. 35506
  • PAS-Ex-Schiene-kurz Art.-Nr. 35508
  • PAS-Ex-Schiene-kurz Art.-Nr. 35475
  • PAS-Ex-Schiene-kurz Art.-Nr. 35481
  • PAS-Ex-Schiene-kurz Art.-Nr. 35514
  • PAS-Ex-Schiene-kurz Art.-Nr. 35512
  • PAS-Ex-Schiene-lang Art.-Nr. 35752
  • PAS-Ex-Schiene-lang Art.-Nr. 35752
  • PAS-Ex-Schiene-lang Art.-Nr. 35704
  • PAS-Ex-Schiene-lang Art.-Nr. 35699
  • PAS-Ex-Schiene-lang Art.-Nr. 35737
  • PAS-Ex-Schiene-lang Art.-Nr. 35687
  • PAS-Ex-Schiene-lang Art.-Nr. 35713
  • PAS-Ex-Schiene-lang Art.-Nr. 35710
  • PAS-Ex-Schiene-lang Art.-Nr. 35728
  • PAS-Ex-Schiene-lang Art.-Nr. 35678
  • Cable lug connection: A thread is provided in the connection hole. The spring washer secures against self-loosening.
    Advantage: Quick and easy connection; an additional nut is not necessary.

     
  • Push-in connection Connection of flexible and rigid conductors up to 16 mm².
    Advantage: Installed quickly and without tools.

     
  • Flat and round conductors: Connection of flat conductors with 30 or 40 mm and round conductors with a diameter of 10 mm possible. Special adapters available.
    Advantage: With the two adapters, the flat and round conductors cannot come into contact with the terminal screws. They ensure a defined, non-sparking contact between conductor and equipotential bonding bar.

Equipotential bonding in hazardous areas

DEHN is a solution provider with an extensive product range for "equipotential bonding in hazardous areas".

So, in addition to the new equipotential bonding bars, you will find many other reliable protective components for use in Ex zones 1/21 and 2/22 here.

Good to know: DEHN products for Ex zone 1/21 are non-sparking.
In addition, all products for Ex zones 1/21 and 2/22 are secured against self-loosening.

 

The equipotential bonding system forms the basis for safe system operation.

Contact

Have you got any questions? Contact us.

DEHN MIDDLE EAST FZE

Phone: +971 48818380

Fax: +971 48818397

back to top